ABS Machining

Abs resin is a blend, which is an acrylonitrile-butadiene-styrene copolymer. The English name is Acrylonitrile-butadine-styrene (ABS for short). As long as the ratio of the three, the combination method, and the size of the particles are changed, a series of varieties with different impact strengths and flow characteristics can be produced. And fluidity will decrease, strength and heat resistance will decrease.

Used ABS machining is a water-absorbing plastic that can absorb 0.2% -0.35% moisture at room temperature for 24 hours. Although this moisture accountant will not have a major impact on mechanical properties, if the humidity exceeds 0.2% during injection, the plastic surface It will be greatly affected, so when molding ABS, it must be dried in advance, and the moisture content after drying should be less than 0.2%. Modified ABS

ABS resin is an acrylonitrile-butadiene-styrene copolymer. Its English name is Acrylonitrile-butadine-styrene (ABS for short). It is a bulk general-purpose resin. After modification (adding additives or alloys) to improve its performance, ABS is an engineering Plastics, Machining Abs Material are the main modified plastics with large output, many types and wide applications.

ABS is light yellow granular or bead opaque resin, non-toxic, odorless, low water absorption, and has good comprehensive physical and mechanical properties, such as excellent electrical properties, abrasion resistance, dimensional stability, chemical resistance and surface gloss, etc. And easy to plastic machining. The disadvantages are weather resistance, poor heat resistance, and flammability.

Comments are closed