Can we Use Different Brand Tires on Our Car?


Most of the car owners complain that their car seems to be not working as it were before ever since they changed their vehicle’s tires. Instead of having a firmer grip and greater fuel efficiency, the performance of the car is going south. And for a car as luxurious as a Ferrari, this surely is a black spot on the image of the brand. To clear the elephant in the room, after listening to the same performance issue by so many Ferrari owners, the experts at mechanics in los angeles has explained in detail why using different brand tires other than the factory-manufactured isn’t that much of an ideal choice, if it is an optimal safety and performance, you need from a Ferrari!

Experts recommend that vehicles be fitted with identical tires in every wheel position on your car if you want a safe yet lively ride. That means the front and rear tires must have the same brand, size, tread pattern, load index, and speed rating. Switching to new tires is not an appealing alternative because all of this is already done when the general tires are placed by the manufacturers. Unless and until all of the features listed above are present in the replacement tires you intend to install.


1 or All

Although it is not suggested that different tire brands be used on your vehicle, there may be circumstances when you have no choice but to switch to a different tire brand. For example, a tire popping or being entirely ripped. Other times, it could be due to fitment concerns, such as asymmetrical fitments that necessitate different tire sizes on the front and back.

Even in such instances, when a pressing requirement must be met at any cost, it is preferable to replace all of the tires with a different brand than to replace only one. One of the main reasons is that replacing a single tire on a vehicle can have negative consequences on the vehicle’s suspension system, gear ratios, transmissions, and tire tread wear. If a single tire replacement is inevitable, it is suggested that the new tire be matched with the vehicle’s deepest tread tire and installed as a pair. To maintain the vehicle’s balance, either this or all four tires be replaced with a completely new tire brand.

The Ideal Tires to Go for

When it comes to selecting the best tires for your vehicle, there are a few factors to consider. As previously stated, mixing brands is not an ideal practice; however, the most significant aspect of new tires is their specs and quality. Make sure your new tires are the same size and type as your old ones when replacing them. The replacement tires on your vehicle’s rear axle must be always installed by your tire dealer. There are some scenarios where not all of the tires need to be replaced. In such cases try replacing two tires instead of all but the two tires that need to be replaced must be chosen critically.

Because the fresher tires have more tread than the worn ones, when you put on two new tires, you’re essentially mixing tread depths. Because the driver will feel traction slipping more quickly if the lower tread tires are in front, these replacement tires should be fitted on the back.

The replacement tires, which have deeper treads, are supposed to be installed in the vehicle’s back. One main reason is that rear-axle tires with deeper treads provide better handling, wet grip, and water evacuation, reducing oversteer and vehicle instability in wet conditions. Wet straight-line braking and stopping distance can be improved using deeper tread tires on the front axle. Although it is advised to get your tires replaced by the finest popular mechanics just so that the car brings in not only the adrenaline but also keeps you safe.

Safety Precautions

  • Even though the right kind of tires play a very vital role in conducting a safe drive but another factor that plays the central role equally is the driver him/herself. One thing that you should keep in mind is that there are loads of ways for a driver to keep himself and the vehicle safe on or off the road. Some of the precautions that can lead to a safe drive are as follow:
  • The first thing drivers must learn is to never make a quick turn; instead, slow down for at least 100 meters before turning. You can be decreasing the life of your tires if you take turns at higher speeds. It’s preferable to keep your speed constant during the turn. When braking in a turn, be cautious.
  • Because, as you may know, the tire is responsible for keeping the car balanced through the use of the grip. Always double-check the tread of your car tire to maintain that road grip. You don’t want to put off thinking about your tires until an inspection. Placing a quarter upside down in the tire groove is a simple way to check your tread. If you see more than half o f the tire, it is suggested that you start looking yourself for new tires.

Comments are closed