Canon Pixma MX922 Printer

Canon Pixma MX922 printer is one of the most used multifunctional feature devices. The features provided in the printer are unique and also have the characteristic of wireless printing also it helps to reduce time with increased performance. It is not at all complicated, all it requires primary hardware setup as a first-rate step.

 

So if you are also looking out for the steps to set up the canon pixma MX 922 printer then this article will help you do it. Follow the steps below and get started with the canon setup for the canon MX 922 printer as this guide will help you do the setup easily.

 

Steps For Canon MX 922 Setup

  • The first step is to unbox the printer carefully and make sure that the printer is sealed properly with the purchasers’ seal.
  • The next step is to remove the printer from the tapes pasted on all parts without damaging the printer for the process of the canon mx922 setup.
  • The next step is to plug the printer to the power socket and the other end to the printer’s cord.
  • The next step for the canon mx922 setup is you need to download the printer’s driver from the renowned website also you need to make sure that the printer’s driver installed in the printer is compatible with your device.
  • The last step is to insert the sheet in the printer’s tray and then you need to run the print test.

 

Well if all goes well then you are successfully done with the canon mx922 setup. In case still, you are having issues or queries then you can contact us.

 

Canon mx 490 setup

 

Steps For Canon MX 922 Wireless Setup

  • These are some requirements that need to be fulfilled in order, to begin with, the wireless setup procedure.
  • The first one is to ensure that you have the WPS push button available, please check together with your tool’s person manual for information.
  • The next is that you should have your network of WPA (Wi-Fi Protected Access) or WPA2 safety protocol. 
  • Also, the network should be protected as you need to have the safety uFor info on which security approach is getting used in your wi-fi community, please check the wi-fi connection settings on your laptop.
  • The first step is to press the setup button A at the printer.
  • Now the next is to select the wireless LAN setup and press the ok button.
  • The blue Wi-Fi lamp A, will mild up whilst the wireless connection is enabled.
  • The printer will now routinely search for entry to points helping the WPS function.
  • The show on the printer must be as proven for the process of canon mx922 wireless setup
  • Now after you are done with the above step you need to press the WPS button for approximately 5 sec and then press ok on the tool.
  • The next is to press and preserve the WPS button on the access factor.
  • Well in order to begin with the WPS process you need to refer to the manual instruction booklet for the wireless setup process.
  • Press the ok button on the printer inside 2 minutes for the setup.
  • You will notice that the blue Wi-Fi lamp on the printer will flashes while trying to find or connecting to the access factor.
  • After the subsequent display will appear then you need to press the ok button.
  • If every other display screen seems, please talk over with “troubleshooting” within the user guide for the process of canon mx922 wireless setup.
  • If the WPS wi-fi setup continues to be failing after following this manual, please touch us for further help.

 

Conclusion

 

We believe that now you are able to do the canon mx922 wireless setup as explained above. In the case still, you are facing issues then you can get in touch with our expert they will assist you further as our team is available for 24*7 at your assistance to resolve all your queries and doubts. Feel free to reach us we will assist you with the best of advice and expertise.

 

Comments are closed