Fix HP Printer Symbols Error Quickly

There are many buttons on the printer and if something is wrong, then it is indicated via lights like alarm on the Printer, most people fail to understand what the light is for and what its warning, if they don’t know the issue then obviously they are going to have a more time to fixing it as well. Therefore, we will help you with HP ink symbols and its error, and tell you the possible points to rectify the problem as well.

Know what different HP Printer Symbols mean and Fix symbols issue

  1. Wireless Light 

Blinking of the wireless light indicates:

Printer is not able to find the wireless signal

its taking more time to configure a connection

  1. Attention Light 

Facing some error then it will be communicated to you via attention light. A part from blinking when a two sided print job it delivered, it also blinks when you are facing either of the below errors:

Out of paper 

When your printer is out of paper then you can try the following options:

  • Check the paper sheet tray and reload more paper in it:

If the paper is torned, or bent then use a fresh new paper sheet. Also, make sure that the dimensions of the paper are compatible with the printer recommendations. Now you can align the edges of the paper sheet with the help of an even surface and insert it in the paper tray of the printer.

  • Check the Printer Back Panel Cover.

It is simply possible that the back panel is not in order. If it is not closed properly, then there might be jammed paper inside it. If this is the case then take off the back panel properly, clear the turned paper and place the panel back on the printer.

  • Reset the Printer

Unplug the power cable directly without turning off the printer. Then wait for a while before plugging it back in the printer. In case the printer does not turn on automatically then try it by pressing its manual power button.

  • Dust the Rollers of the Printer

If dirt has gathered in its rollers then it can lead to paper feed issues as well. Hence, clean it if needed then turn off the printer and unplug its power source. Use a piece of lint-free cloth and fresh water to clean it. Once you are done with cleaning the printer’s rollers, leave it to dry for a while before putting it back. Once it is cleaned then you can plug back the power cable and turn on the printer.

Front Door Open

If you are facing this error then you can try the following ways to fix it:

Check the cartridge door for barrier

Look at the door and the area around it to make sure that there is no obstruction in and around the door which would stop it from closing properly.

Remove the block and close the cartridge access door again and look for the error message on the control panel.

Restart the Print Spool Device

Try restarting it by following the below mentioned steps:

Switch off the printer

Open the control panel and go to Performance and Maintenance.

Open the Administrative Tools, select Print Spooler and right click on it

Click Stop and then select ‘Start’ to restart the Print Spooler

Click OK and restart your laptop and printer.

Paper jam indication

In order to fix it, you can do the following:

Clear the jam from outside

You can clear the jam from outside by cleaning

Input and output trays- Where you insert the fresh sheet and the print out comes out

ADF- Open it to clean any leftover sheet

Clear the jam from inside

Firstly turn off the printer and disconnect it from the power source. Remove the jammed paper from the following areas:

Toner or ink cartridge area- Open the access door, move the carriage if and then eradicate any jammed paper.

Under the paper path

Input tray

Bottom clean out door

Rear access door

Paper size issue

Unauthorized toner/ drum

3. Attention and Toner supply light

When attention light and toner supply light blinks together, it means that you are facing either of the below errors:

Drum or toner missing

Installation of HP protected toner or drum

Cartridge error

Incompatible toner or drum

Unauthorized drum or toner

4. Attention and ready lights

When the attention and ready lights blink together then it means that you are facing a fatal error state.

5. All lights off

When you see no lights on the control panel then it means that:

The printer is off

An issue with the power supply

If you are facing these above mentioned issues or any other hp printer error then feel free to get in touch with us and we will help you in the best way possible to get rid of them.

If you experience any issue while installing HP printer and printing, please contact at the toll-free number at 1-833-283-0002 or visit for guidance.


Comments are closed