How can I bind a rc transmitter and rc receiver?

You will find three correct methods to bind the RC transmitter and RC receiver. The succession of steps needs to be adopted correctly. For those who have question or else you aren’t successfulwith the pairing process, we advise method by JetiBox (procedure 3).

Procedure 1

1. connect a bind plug towards the receiver (Ext. port)

2. connect an energy supply towards the receiver

3. switch on the transmitter

Procedure 2

1. connect a bind plug towards the receiver (Ext. port)

2. connect an energy supply towards the receiver

3. within the transmitter menu activate pairing process (primary menu/advanced qualities/wireless modes/pair Texas module = you need to press the 3D button, whether or not the transmitter displays the important pairing process, it??s vital that you reset the whole process)

Procedure 3

1. connect a JetiBox towards the receiver (Ext. port)

2. connect the ability supply towards the receiver and activate the pairing process via JetiBox menu. Once the pairing process is within progress, you will notice around the JetiBox display countdown (60s) to make sure that pairing process is actually mixed up in receiver.

3. within the transmitter menu activate pairing process (primary menu/advanced qualities/wireless modes/pair Texas module = you need to press the 3D button, whether or not the transmitter displays the important pairing process, it’s vital that you reset the whole process)

Comments are closed