Brother Printer is usually used by people around the globe to do their home place, office as well as home-made projects. But it’s also very irritating to Fix Brother Printer Error Code 76 issue while you do an important job and get an error in Brother Printer. The error code 76 indicates that you are unable to print since it is also one of the major fuser errors, errors that were also found by multiple users when using the printer. It is triggered by different sorts of problems, including a foreign object, such as a torn sheet of paper, a paper clip, stuck in a Brother Printer, or a Mechanical breakdown in the Printer area, or more sometimes arises when an unexpected power loss occurs when the Printer is switched off the moment when the Principal Board gets confused and thinks the Printer in sleep mode and at X temperature when the Printer is switched off; Don’t think about it then. You can quickly overcome this by utterly applying the basic troubleshooting steps suggested by Brother Printer experts.

Then, here are particularised basic steps to resolve this obstacle, so follow the steps below to instantly fix the problem.

Method 1:- Change the Fuser
The Error Code 76 in your Brother printer is also related to fuser error, so you need to change the fuser, but first, just in case try to reset settings to factory defaults.

Method 2:- Change or Update the IP Address

Another solution is that is to modify the IP Address. For this you have need to do right-click on your printer, click “Properties”, then click the “Ports tab” then hit on your Brother printer and then click on “Configure port: (or you can delete the existing one and then add another one).
Moreover, if you need to do is update the IP Address, you can. But the problem is that the Brother Printer doesn’t have a static IP address, it’s effective. If you want to verify that, then go to your Brother Printer and press the “Reports” button and then print out the network configuration report. Now your IP address will show on that. It’s actually the last digit in the IP address that changes. This will absolutely solve your problem.

Method 3:- Perform the Maintenance Mode Procedure

For Maintenance Mode, you have to follow these steps:-
Step 1:-Turn of the Brother Printer
Step 2:- Then switch on the Brother Printer device while holding down to the “menu” button until all the led are flashing On/Off. Now you are in “maintenance” mode.
Step 3:- Next, press “80” button.
Step 4:- Then press the “mono start” button several times until you see for removal: XXXX
Step 5:- Next, press “2783” button in order to reset the purge counter. You will see removal: 0000
Step 6:- Then press the “stop” button.
Step 7:- Press “99” to exit the maintenance mode.
Now check the error is resolved.
Source URL: Brother Printer Unable to Print 76