How To Get the Most Out Of Your Laboratory Incubators?

Laboratory incubators are widely used in biomedical research because they allow you to cultivate living cells without using cell culture or animal models. Despite their utility, lab incubators can be confusing. While using one such incubator in your lab, ensure your water line is clean and fill it with fresh water if necessary.

In addition, always check the temperature and humidity settings and ensure they are set at an appropriate range for the sample you are heating. Maintaining an incubator is extremely simple if you follow these simple guidelines and tips.

  1. Clean and Check the Water Line

Check the water line to ensure it is not blocked or contaminated. You should also check that there is enough water in your incubator. If you don’t have enough, add more by opening the valve on your incubator.

If you add excessive water during cultivation, it may become difficult for new cells to form and achieve a proper chain of events. Therefore, it’s recommended to discard some of the extra liquid so that new cells can be added when needed.

  1. Manage the Humidity

Testing Laboratory Incubators often have a moisture monitor to ensure you add the right amount to your incubator. Higher humidity levels can greatly assist the growth and development of living cells.

The only exception is when you are cultivating live microorganisms, as these require less humidity than regular cells. However, high humidity will create an ideal environment for microbial growth, so don’t overdo it if you’re cultivating microorganisms.

  1. Maintain Your Incubator Temperature

Temperature plays a crucial role in the cultivation of living cells and microorganisms. Most cell cultures require one or two degrees higher temperatures than human body temperature (36 degrees Celsius). Some bacteria also require a few degrees higher temperature to grow successfully.

If your incubator’s settings are too low, it can cause the growth of unhealthy bacteria and other pathogens. While many factors may make the temperature fluctuate, poor filtration or clogged tubing is one of the most common causes.

  1. Prevent Infection Even If You Do Overdo It

If you overdo it when cultivating cells, it doesn’t mean you create an environment that could cause an infection or contamination. Your lab incubator may become contaminated and look different after being used for many experiments, but your samples should still be safe if you follow the guidelines mentioned above. It’s good to understand how all these work together when using a lab incubator in your research Laboratory.

Final Words

Laboratory incubators are simple, but they are not indestructible. Overusing an incubator can expose your samples to excessive heat and other elements. In addition, you should avoid leaving your samples in the incubator longer than they need to be there. The living cells inside don’t need every possible thing in this world; proper temperature and sufficient moisture are enough for them to grow and meet their goals.

Comments are closed