Isola FR408HR printed circuit board

This is Isola FR408HR printed circuit board made of HDI green double sided PCB board.There is a dielectric layer in the middle of the double-sided printed circuit board, and both sides are wiring layers. Multi layer PCB is a multi-layer routing layer. There is a dielectric layer between every two layers. The dielectric layer can be made into a very thin layer. A multilayer circuit board having at least three conductive layers, wherein the outer surface has two layers, and the other layer is synthesized on the insulating board. The electrical connection between them is usually realized by plating through holes on the cross section of the circuit board.

Isola FR408HR printed circuit board
Isola FR408HR printed circuit board

The Isola fr408 is a high performance FR-4 epoxy laminate and prepreg system designed for advanced circuit applications.

Its low dielectric constant (DK) and low dissipation factor (DF) make it an ideal choice for broadband circuit design which requires faster signal speed or improved signal integrity. Fr408 is compatible with most FR-4 processes. This feature allows the use of fr408 without increasing the complexity of current manufacturing technologies

This is the standard laminate used in our industry. We have all the major models in stock. The standard thickness used is 1.6 mm, but we also provide 0.8 mm, 1.0 mm, 1.2 mm, 2.0 mm, 2.4 mm and 3.2 mm thickness. The most common copper thickness is 35 microns or 1oz square feet, but 70 microns and 2 oz square feet of FT are usually used for higher current applications.

It is closely related to FR5, an old high-temperature version, but has now been replaced by the more common BT epoxy type.

Comments are closed