Juniper Cables Passes The Fluke Test To Meet ISO-Industry Standard

Juniper Compatible QFX-QSFP-DACBO-10MA QSFP+ 10m Twinax Breakout CableWhether installing new cable (fiber or copper), or troubleshooting existing cable, Ethernet networking cable test, in short fluke test plays a major role in determining the quality of the processor. With the evolution of cabling infrastructure, the Juniper cables certification standard is continuously being developed to enable the guidelines for data center cabling operators when installing, testing, troubleshooting and certifying either copper and fiber cable network.

As network or Ethernet cable plays a key role in achieving highly reliable and secured wired connections for both residential as well as commercial purposes. There are many network cables available on the market that fail to meet the ISO or TIA certification requirements and hence, result in network downtime frequently and troubleshooting for mission-critical applications. To perform as per the standard and up to the specifications, Ethernet or Juniper transceivers as well as cables need to pass the Fluke test to meet the TIA/ISO guidelines.

Which types of testing certifications are prescribed in the Fluke test and how the testing method associated with the network cabling performance and so other information are defined in this post to help you understand the importance of seeking the ISO/TIA certified Juniper cables and other products.

Fluke Testing For Juniper Cable?

Fluke test is a series of tests conducted under the observation of the Fluke Network Cable Analyzer, which is conducted to know the Pass or Fail information of the cables in accordance with industry set standards. This test basically provides a professional level of assurance that the Juniper cables have the desired network transmission capability to support the data communication desired by the users. In this test, patch cord testing, channel testing and permanent link testing are analyzed by installers and end-users to verify the performance of the Juniper cable links.

Patch Cord Testing – Crucial Part Of The Juniper Cable Test

Patch cord testing is known to evaluate the performance of the network patch cord, thus it is a key testing procedure in the Fluke test that has the highest level of requirements for their cable performance. A Juniper cables passing the patch cord testing usually have higher performance and is more durable and reliable to be deployed in high-end data centers. When implementing the test of patch cord, a copper patch cord is connected between two pieces of test equipment, including the whole patch cable and the adapters. Any cable that is longer than 10m is not compliant and required to be tested to the channel specifications.

Channel Testing In The Fluke Test

Juniper Compatible SFPP-10GE-T 10GBASE-T Copper SFP+ TransceiverIn a network, the channel is the major source of connection between two end devices, including any patch cords used for cross-connects or interconnects between them. However, the requirements for cable performance in channel testing is less strict than that of the patch cord testing, thus Juniper cables that pest the obstacles of channel testing not always pass the patch cord testing in the Fluke Test, and therefore, the one that pass both the test can be stand out as the ISO/TIA certified Juniper cables.

Best of all, Juniper cables and transceivers that are backed by Fluke Test, assuring the buyers and data centers managers to get the long-run performance with no technical hassle.

Comments are closed