Liquid Cooling Can Do Miracles to Your System; Know More!

Alphacool Eiswolf 2 All-In-One GPU Cooler for the RTX 2080/2080Ti FE, 240, Digital RGB

If the user loves taking up the maximum output of their system hardware, then liquid cooling is an important function. An AIO liquid Cooling CPU and GPU or a custom loop featuring 360 or 420mm radiators will be perfect at transferring heat from the system than an air cooler. Overclocking indecently surges the heat released by the components. The coolants used in liquid coolers transfer heat more perfectly than direct contact heat pipes of air coolers. Also, with an AIO water cooling system, the PCwill perform at its utmost capacity, and the user won’t have to think about temperatures. A computer with AIO coolers or a custom liquid loop will seem cooler than a system using an air cooler. Liquid coolers and loops give a special character to the appearance of the computer making it stand apart from the crowd. Moreover, all water block cooling heads are built of bare rods of electrolytic copper. These rods are manufactured using a precision-guided CNC machine to construct a bare copper water block or cooling head base.

Aquacomputer Kryographics NEXT RTX 3080/RTX 3090 GPU Water Block

The base of Ek Water Blocks GPU Water Block is manufactured of nickel-plated electrolytic copper while the top is created out of high-quality acrylic material. The sealing is assured by quality rubber O-rings. Screw-in brass standoffs are already installed and permit for a safe, painless installation process. This stuff is compatible with famous RGB sync technologies from all major motherboard producers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB header. EKWB recommends the purchase of an aesthetic retention backplate that enhances the appearance of the graphics cards. The EK-Classic GPU Water Block Strix RTX 2080 Ti D-RGB functions efficiently with EK-FC RTX 2080 +Ti Backplate Classic in the Black shade. Fan hubs are very important for any PC. A Fan Hub for Pc usually has a signal cable that plugs into a fan header on the motherboard. The user can either use the bios or software within windows to change or regulate the speed of their fan.

Bitspower Touchaqua PWM FAN Multi-Function Hub

The hubs just repeat the signal so whatever fan settings the BIOS has for the header the user chooses will control the fans. It works only if all the fans are identical PWN fans. Managing multiple fans from a single case input has turned out to be quite easier for the users now. If the motherboard lacks fan interfaces, fan hubs can be used in a neat & tidy way to add fans & expand fan interfaces designed for 12 V 4-pin or 3-pin fans. This PWM hub efficiently controls fan speed, also the user can slow down & speed up the fans up to the maximum speed if they wish to. They need to connect the Molex & the 4 pin at the same time to operate multiple fans. Thus, each and every component of a PC functions simultaneously to give the best performance.

Comments are closed