Method to resolve Canon Printer Not Responding?

Canon Printer Not Responding

There can be multiple reasons for your Canon printer not responding. But the most common reason behind this issue is the lack of communication between the printer and your computer. Until the issue is resolved properly the Canon printer won’t print. It is also possible that you are using some outdated printer driver. This can easily be resolved by just updating all the drivers. You always need to keep your software and drivers updated to avoid such problems. So now you are facing this issue then we should discuss Canon mx922 troubleshooting.

To find the perfect solution for the given problem you need to find why it occurs. If you can find that then you will get the exact solution for the Canon mx922 printer not responding.

Usually, this issue occurs due to two reasons:

  • Outdated Drivers.
  • Poor connection between PC and printer.

For the first situation, you need to check for all the drivers, and if any update available then update them as soon as possible.

Canon Printer Not Responding

Steps to Troubleshoot Canon Printer Not Responding:-

Step 1: Check and see if your printer is ready:

  1. Your printer is offline if it’s not turned on or able to communicate. Try to check if it’s ready for printing and working with another device.
  2. Check if the printer is turned off or is in sleep mode. Press the Power button to turn it back on or wake it up.
  3. See to it that there is paper inside the input tray and that the correct ink or toner cartridges are used. A Canon Pixma MG3620, for instance, can go offline if you’re not using PG-240 and CL-241 ink cartridges.
  4. The printer’s control panel mustn’t be displaying error messages or flashing lights.
  5. Restart your printer and conduct a test print to see if the problem is resolved.

Step 2: Make sure your printer is properly connected:

Make sure that the printer’s USB or Ethernet cord is securely attached at both ends. Use another USB or Ethernet cord to find out if your existing cord is at fault. If the other cord works, then it means you’ve been using a faulty cord.

For wireless printers, make sure they are connected to your Wi-Fi network. Suppose your printer can work with your computer or PC via cable connection without any issue. In that case, it means your network connection is faulty. If you don’t know how to set up a wireless printer, check out our guide on “How to Set Up a Wireless Printer on Windows & Mac.”

Step 3: Conduct a Printer Power Cycle:

  1. Press the power button and unplug the power cord to turn off your printer completely
  2. Wait for 30 seconds before re-plugging the cord and turning the printer back on
  3. Conduct a test print to see if the printer is working properly this time around

 

 

Source: Canon Printer Not Responding

Comments are closed