Setup HP Deskjet 3630 Printer Through 123 hp com dj3630

HP printers will always need you to download the driver from the Internet or using the installation CD. Before using the printer, it is always important to properly download the drivers for your HP DeskJet 3630 printer. You can check the drivers that are compatible with different types of operating systems.


HP DeskJet 3630 initial setup


When setting up the printer for the first time, these are the steps you will need to follow. First, you will need to unpack the HP DeskJet 3630 from the box. Setup printer through When you take the printer out of the box, materials like tapes and stickers should come off. The ink cartridges must be installed. Then you will need to load the paper into the input tray. After this, install the printer software.


How to configure the HP Deskjet 3630 printer?


  • You must unpack the printer and then discard the plastic wrap. If necessary, recycle the wrapping materials.
  • Now, plug the printer into a power outlet and then turn on your printer. Connect the power cord to the back of the printer and to the electrical outlet.
  • Make sure you have the 3630 HP ink cartridges in their respective slots. Note that you can only touch the black plastic on the ink cartridge.
  • You can discard the plastic wrap from the ink cartridge, and then put the plain paper in the input tray.
  • Now install the printer software, and then to complete the ink cartridge alignment, follow the instructions on the alignment page.


First-time setup Setting up the HP Deskjet 3630


To achieve the HP Deskjet 3630 printer setup (, remove the printer from its packaging. Check the package for the full list of items. Lift the scanner lid and remove the packing tape around it. The tape and packing material should also be removed from the cleaning area and the ink cartridge access area. Remove the packing tape from the paper tray door by extending it and push the paper tray forward until it clicks. Turn on the printer by plugging it into a power source and set Preferences. To fully configure the HP Deskjet 3630 printer, press the down arrow on the control panel to select the language. Then press the down arrow to select Set Country / Region. Press OK after each action. Pull out the paper tray and the tray extender to load the paper. The slider width guides can be adjusted to their outermost positions.


After loading and aligning the paper, push the paper tray forward until it clicks into place. The ink cartridges must be loaded through the access door that is raised and locked in place. As the door is raised, the carriage automatically moves to an accessible position. The carriage must be idle and silent for the configured HP Deskjet 3630 printer to continue. After removing the cartridge from the package, remove the plastic tape from the top without touching the ink nozzles. Lift the cover of the ink cartridge slot, press the cartridge until it clicks into place. Repeat for other ink cartridges and close the lid to secure the cartridges in place. Close the print cartridge access door and align the cartridge according to the instructions on the control panel. After aligning the ink cartridges, the printer prints an alignment page


Wireless or PIN setup menu method


Press the wireless button on the printer’s control panel. Click on settings and select Wireless Setup Wizard. Follow the instructions on the screen to complete the wireless connection. Your details, such as your network username and password, must be entered during the setup process. Insert the printer driver CD-ROM to install the HP Desk jet 3630. Printer driver software. The on-screen instructions must be followed to complete the wireless setup


Printer Settings |


The first step in setting up the printer is to unpack the printer and see if the package contains all the accessories that came with the printer. usually, there are at least two cables. One that connects the printer to the wall power supply and the other cable that connects the printer to the computer. Apart from this, you can also find some cartridges inside the box. Take them all out and unwrap them. Connect the printer to the wall power source and turn it on. Now press and hold the power button to turn on the printer. Once the printer is on, open the paper exit tray and locate the cartridge clips. 123 hp com dj3630 is a good way to set up a printer. Push the cartridges in until you hear a click. Now that the cartridges are connected to the printer, you can print right away. Insert some papers into the input tray and let the printer adjust its letterhead. After the printer takes a sample print, check if the settings are correct, and if not, you can set the print head alignment manually.




In this post, we share all the steps to set up an HP wireless printer. All steps are simple. After following the above steps still, you face any issue, for that you can contact us to fix the “123 hp com dj3630” issue. We have the best team of technicians. You can contact us at anytime our expert technicians are available 24*7 for your help.

Comments are closed