Steps to fix HP printer error 0xc05d1281

HP printer has a tonne of features that make it popular with customers. It’s really convenient for all to use. But like most computers, users of HP printing systems are faced with certain common errors. HP printer error code 0xc05d1281 is a very common error that happens for a variety of reasons. If you want to erase the HP printer error 0xc05d1281, you need to use the proper solution for troubleshooting. Professionals are also here to get you out of here. They will send you one of the best suggestions for your needs. You should use the steps given to erase this error code. If these actions fail to overcome this problem, please contact the practitioners. They’re going to send you one of the most recent troubleshooting choices.

HP Printer Error 0xc05d1281

3 Steps to fix HP printer error 0xc05d1281

To fix this type of error, you need to apply the best troubleshooting steps. Some of the best solutions are mentioned here:

Step 1.

  • Click and hold the “*” button and then press “#” and release both buttons, Display should say “ Enter special key combo.”
  • Click and leave in sequence the “1”, “2” and “3” key, the display should say something like “ support” R0631M.
  • Click and leave the right arrow key until the display says “ system configuration menu.”
  • Click and release the OK button display should say “ Hardware failure status.” If not there already, arrow key over to “ Hardware failure status.”
  • Now press and release the OK button.
  • The display should say “ Hardware failure status”. Hit Ok to clear.”
  • Click and leave the OK key. Message changes to “ Hardware failure status Cleared. Click cancel to continue.
  • Click and leave “ cancel” key as many times as necessary, so that, either the “ Welcome to Photosmart Express” screen appears, or the “ Ink system failure” screen pops up. Not print at this stage.
  • By using the power key, switch the unit off and unplug the power cable from behind the printer and wall.
  • Now, wait for a few minutes at least 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, then into the printing machine.
  • Switch the unit on. The printing machine may show the message “ use the power key to shut down the printing machine “ followed by “ click OK to continue.” Hit OK.
  • The printing machine will start the “One-time ink initialization process.” Allow this process to complete and don’t interrupt.
  • In the last click setup menu on the all-in-one then scroll the mouse and choose print report then choose the self-test report.

Step 2. 

  • Unplug the power from back on the printing machine.
  • Now wait for a few seconds and then hold the “ print photo” and “ cancel” at the same time. You should be able to see it with a blank screen for a few seconds.
  • Now, it’s done and then tries again and again if it does not work.

Step 3.

  • Unplug the all-in-one from power and wait for 30 seconds.
  • Plugin power only. Now repeat the same steps 2 to 4 more times.
  • After plugging the unit into power you need to check the functionality.

To remove this error, the given solutions are the best. But if the error still then don’t take tension.

Source: Printer Error 0xc05d1281

Comments are closed