Understanding How A Sand Filter Keeps Your Pool Clean

In relation to the forms of pool filters you are able to install in your pool, you will discover enough alternatives to create your head spin! The sand within a pool filter has been ground to about .45 to .55 mm in diameter and is quite rough any time you initially commence using it. Over time the sand loses its roughness and desires to be changed. The sand usually desires to be changed each 5 years; some happen to be known to go as long as 20 years without having being changed although they may not be as efficient as they need to be at that time. As the sand loses its rough texture the filter has to run much more frequently to complete its cleaning task. Get far more data about Sandfilteranlage

Recommendations on when to modify your sand:

Remove the old sand from the swimming pool filter and to complete this you will need to pull the drain plug and let the water drain out.

Use a small cup to dig out the sand so it is possible to expose the laterals and move the stand pipe out from the way.

Use caution when digging the sand out so you don’t break the laterals on the filters’ underdrain. They’re fragile and are very easily broken.

As soon as the sand is totally removed, clean and examine the laterals. Most laterals will unscrew allowing for easy removal in the tank.

In case you really need to get rid of impacted dirt in the laterals, soak them inside a mix of water and muriatic acid; rinse thoroughly.

Rinse out the tank and re-install the clean laterals.

Replace the underdrain assembly then add water until the tank is half full to cushion the laterals when you start to add the sand.

Add a bag of sand, making certain you level the sand in the sand bed ahead of you add the subsequent bag of sand. The volume of sand you will need to add is determined by the manufacturer’s directions. Should you can not obtain the instructions contact a swimming pool qualified for guidance.

As soon as the correct quantity of sand has been added, reassemble the filter tank and multiport valve.

It’s important to start your filter system within the backwash mode to fully flush the dust from the sand and to permit the sand to settle totally around the laterals.

For the reason that cleaning a sand filter just isn’t a thing that may be carried out with any regularity, you could come across it much easier to contact a swimming pool experienced when the time comes to replace the sand in your filter.

How the sand filter system performs: A swimming pool sand filter separates backwash contaminates in the backwash water and then they are discarded separately. The backwash filtering system has an inlet and an outlet plus the filter and the backwash valve connects the pump outlet and sand filter inlet, and connects the sand filter outlet and pool return. When in the backwash position, the backwash valve connects the pump outlet and sand filter outlet, and connects the sand filter inlet and backwash filtering system inlet.

Comments are closed