Using A Professional To Repair The Garage Door

The aim of automatic garage door systems is to make life simpler. They eliminate the need to get out of your car and manually open and lift bulky doors. Alternatively, a single button press activates a motor that lifts it for you.

However, problems can – and do – occur with any mechanical device. Knowing what to do in the event of a failure would ensure that the issue is resolved quickly so you can keep enjoying the comfort it provides.

We’ll go over the top five issues that homeowners have reported. We’ll also go over how to tell when it’s time to call a professional for Garage Door Opener Lexington service.

Broken Springs Is Number One

High-tension torsion springs are used in your machine to assist the operator’s motor in lifting the doors upwards. Even though springs are solid and long lasting, they are not indestructible. Repeated use over a long period of time will degrade them to the point of failure. Depending on the standard, they will last anywhere from five to 20 years.

It is strongly recommended that you should not manually open your doors if a torsion spring breaks. It’s not a good idea to do so. If there is a release lever that fully disconnects the spring from the lock, this rule does not apply.

Panels That Have Been Damaged

Over time, the specific panels of your doors – there are certainly more than a dozen – will experience significant wear and tear. They will start to shrink and crack if left unattended. The simplest option is to install replacements.

It’s crucial to remember that the panels support the frame of your door. If one or more of them are seriously damaged, it can have a negative impact on the alignment. As a result, the whole structure would be jeopardized.

An Opener That Doesn’t Work

Remote opener issues are pretty common and, in some cases, simple to resolve. If pressing the button on your opener does not activate the operator’s motor, try pressing the button on the wall-mounted device. Replace the batteries in the control if the wall-mounted device works. If replacing the batteries does not fix the issue, check to see if the remote’s buttons have been broken or become stuck.

It also is likely that the control is communicating to your system’s receiver at a completely different level than it should be. If you’re not sure how to verify the rate, it’s a good idea to contact a local garage door repair service who is an expert in Garage Door Opener Lexington.

Cables That Have Been Displaced Or Broken

You’ll find a collection of pulleys and cables if you look carefully at the parts that make up your device. Without those bits, the doors could not be unlocked mechanically. Though its cables appear to be sturdy, they are susceptible to breakage. They usually fall off the pulleys due to friction, bending, or other issues caused by improper deployment. Both circumstances may result in an inert door, either it break or slip.

You would be tempted to realign a cable that has slipped from its pulley. It’s a straightforward procedure. The issue is that it is also toxic. You’d be better off calling a professional with automated garage door repair expertise.

Tracks That Have Been Bent Or Twisted

From the left side of the gate, you’ll see several tracks. The cables raise the door on those tracks when the motor is engaged. There should be no issues as long as the tracks are correctly matched.

That being said, the tracks may sometimes become misaligned, bent, or harmed. If any of these things happen, the whole system will be jeopardized. The door can be prone to falling off the faulty track.

Thankfully, the concept of a quality system includes some redundancy. Even if one side of the door falls off a twisted or bent track, it is still connected to several other tracks. However, this does not imply that the issue can be overlooked or that its solution can be delayed.


Find more information relating to CLICK garage door opener Lexington HERE.

Comments are closed