What are the Solutions for Canon Printer Error Code 5011?

The Solution to the Canon Printer Error Code 5011


Canon Printer Error Code 5011 Solution is almost always caused by a problem with the cartridge holder, which gets caught inside the printer. Users are unable to scan documents due to a problem with the printer. You will need to perform some troubleshooting procedures in order to get this problem resolved.


The implementation of these ideas, on the other hand, can prove to be challenging. Another possible source of the issue is a defect in the method that was used to manufacture the product. The following is a list of potential fixes for the Canon Printer Error Code 5011 Solution.


Fixing the Canon printer error code 5011 involves the following steps:


Step one: Carry out the Power Cycle procedure.


  1. Disconnect the printing equipment from its power supply for five minutes before attempting to re-connect it.
  2. After that, you will need to make sure that your printer is turned off before removing the cover and replacing the ink tanks.
  3. While the printer is setting up its basic configuration, you should close the cover after turning it on.
  4. Try turning off your printer machine one more time, then press and hold both the Cancel button and the Power button at the same time.
  5. While maintaining pressure on the power button, release your grip on the cancel button.
  6. After you have completed the previous step four times in a row, release both of the buttons you have been holding down.


Method 2: Check to see whether any pieces of paper have become jammed inside the machine.


When utilizing this method, the user is responsible for ensuring that the machine is clear of any scraps of paper that may be lodged inside. Examine the device to check that it does not have any foreign matter, such as a piece of paper or an object, entrapped inside of it.


Cleaning of the Encoder Strips is the Third Method.


If you have tried the solutions described above and are still unable to fix the problem with the Canon Printer Error Code 5011 Solution, you should try cleaning the encoder strip, which is located beneath the carriage. The carriage glides from left to right as it travels.


Method 4: If the problem persists, try powering down the printer and then powering it back up.


Before reconnecting the printer to the power supply and running a test on it, wait ten minutes with it unplugged from the power supply. Raise the top of your printer and activate it while the paper tray is still exposed.


Put the cover back on, and then check to see if the problem with the Canon Printer Error Code 5011 Solution has been fixed. If none of the solutions presented above are successful, they will need to be corrected. Get in touch with the printer team if this doesn’t resolve the issue; if it does, explain what the problem was to them.


Comments are closed