Wireless HP Printer Setup

Wireless printing is all about convenience. No cables, no space restrictions. As long as you are in the network’s range you can print anytime. If you need instructions for wireless HP printer setup then read this comprehensive guide.

#1. HP Printer wifi direct Connection Setup

This connection type does not require an internet connection. You connect your device to the HP printer’s wifi and start printing.

Let’s take a look at how you can perform wireless HP printer setup with wifi direct connection;

  • Press the wifi direct button on your HP printer.
  • For printers with a display, navigate to network settings
  • Then go to wireless settings and choose wifi direct.
  • Now connect your phone or your computer to your HP Printer’s wifi.
  • Open a document, go to file then click print to test the connection.

#2. HP Auto Wireless Connect

  • You need to install HP printer software first.
  • Go to 123.HP.com to download the relevant HP printer drivers and software.
  • Launch the software after installation.
  • When the software asks to choose the connection type, select wireless.
  • Next click the link “Yes, send my wireless settings to the printer”.
  • Wait for the printer to connect, then click finish.

#3. Wireless HP Printer Setup with WPS

This method only works if:

  • Both printer and router support WPS mode.
  • The router has the WPS push button.

If your equipments fulfill the criteria then with the following steps you can easily configure Wireless HP printer setup;

  • Press the WPS button on the printer till the wireless light starts flashing.
  • If there is no push button, navigate to the wireless settings menu through control panel.
  • Scroll the list and tap the WPS option to enable the feature.
  • Tap and hold the WPS button on the router.
  • Let the router and printer establish the connection.
  • The wireless light will indicate when the connection is complete.

#4. HP wireless setup through control panel

This method is only for printers with a display. You will also need the network name and pass key.

If your printer meets the criteria and you have the necessary information then here are the steps you need to follow;

  • Remove any connecting cable, like USB or Ethernet cable then power on the printer.
  • On printer control, open settings then go to network settings.
  • Next, choose wireless settings then tap on the wireless setup wizard option.
  • The printer will detect and display networks in the vicinity.
  • Tap on your network’s name.
  • Type in the passkey if prompted for then tap OK.

For further details visit……wireless hp printer setup

Comments are closed