6 Most Common Ducted Heating and Cooling Problems and Solutions
A ducted heating and cooling system can be a great addition to your home, but like any system, it’s bound to have problems once in a while. Here are six of the most common problems homeowners encounter with their ducted systems, as well as some solutions to help fix them so you can enjoy your heating and cooling system again.
Blocked or Dirty Filters
Blocked or dirty filters are the most common cause of ducted air conditioning and heating problems. Regularly check your filter for any blockages. If you find a blocked filter, clean it with a vacuum cleaner or brush before replacing it.
Clogged Drains
When a ducted heating and refrigerated cooling system is clogged with lint or hair, it can reduce the air flow. This causes the whole system to work harder than it should, which can cause serious problems over time. To fix this, you need to clean out the drain hole at the bottom of your unit. Some units have a removable panel on the side that allows you to access this drain hole easier. If not, you may need to remove screws or panels in order to get inside and clean out any debris.
Frozen Evaporator Coils
One of the most common problems with ducted heating and cooling is frozen evaporator coils. These coils are located in your home’s air handler. The coils make sure that the coolant stays liquid, but when they freeze up, your ducted heating and cooling system will not work properly. You can fix this problem by increasing the temperature settings on your thermostat or turning off your air conditioner for about an hour before you go to bed at night.
Refrigerant Leaks
Refrigerant leaks are one of the most common problems with ducted heating and cooling systems. Refrigerant is a coolant that moves heat from one area to another, so if there is a leak, it means that your system isn’t able to move the heat out of the house as efficiently. This can lead to higher utility bills since you’re paying for more energy than necessary. Call a professional HVAC technician to get it fixed.
Compressor Issues
A faulty compressor can be quite an expensive repair, so it’s important you catch it before it becomes too serious. If your system starts making strange noises, or if you notice any leaks at the joints where the pipes join together, make sure you call in a professional as soon as possible.
Thermostat Issues
If your system isn’t turning on, it may be that the thermostat is not programmed correctly or is set incorrectly for the current time of day. It could also be that the batteries are dead in the thermostat. Another common issue is when you set your thermostat to a certain temperature, but it just won’t cool down or heat up past a certain point.
Poorly Sealed Registers and Grills
If the registers or grills in your ducts are poorly sealed, then you will notice an uneven distribution of airflow in the room. This is due to cold air blowing out of some vents while warm air blows out of others. A poorly sealed register can also lead to condensation on walls, which may cause mould or mildew growth if not taken care of. In order for the system’s efficiency to be optimised, all registers should be sealed properly.
If your unit isn’t working properly and looking for air conditioner duct supplies, get in touch with Ultra Air. They can help you fix the problem in no time.
The author is offer the best ducted heating and cooling solutions, including installation, service, repairs, and duct supplies. Visit https://www.ultraair.com.au/ for more details on air conditioner duct supplies.